Mobile Controlled Bluetooth Car

.

This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.

Components and supplies

Breadboard (generic)

1

Arduino UNO

1

HC-05 Bluetooth Module

1

L293D Motor Drive Shield for Arduino Uno

1

Jumper wires (generic)

2

12 V 200 rpm DC Motor

Project description

Anything that can be controlled is great. Isn't it? We humans love controlling stuff and that is why automation and robotics so fascinating.

This tutorial will teach you how to create your own Bluetooth controlled car. So lets get started.

This will be a Bluetooth controlled car so for this project we will be using HC-05 Bluetooth module to receive the controlling data packets.

We will also need an android app which will be sending the controlling data packets to the Bluetooth module. We will use a third party application ( $ click here $ to download) for this purpose.

1. -\u0026gt; Okay folks! Let's build the hardware.
2. -\u0026gt; Body of the car.

The car which we are building for this project will be a dual motor car. I used two 12 v 200 rpm DC motors. You can use a ready made chassis. I used a PVC sheet as chassis.

Thus the basic structure of our car is ready. You can use this design or you can develop your very own design but remember keep the weight as low as possible as this is a two motor design.

--\u0026gt; Circuit

Now let us build the circuit 

Follow the schematic to make the connections. This is how it will look after all connections are made.

--\u0026gt; Power supply

Now this is a bit crucial.

For powering the Arduino Uno is used a power bank with 5v output voltage. This is not enough to drive those 12v dc motors. So we need an addition power source.

I used two 9v batteries in series to get 18v supply. The major problem here was that here a good amount of current was also required.

My batteries were not able to supply sufficient current and so the performance of this car was not 100% satisfactory. It was working but the motors ran at very low speed.

So I recommend to use a 12v battery or else you would have to compromise with the speed.

--\u0026gt;Code

Here we will use the direction of rotation of motors to control the direction of the car.

Forward - Both motors move in forward direction

Backward - Both motors move in backward direction

Left - Left motor moves backwards and right motor moves Forward

Right - Left motor moves forwards and right motor moves backward

Stop - Both motors stop

void forward()

{

motor1.run(FORWARD);

motor2.run(FORWARD);

}

void backward()

{

motor1.run(BACKWARD);

motor2.run(BACKWARD);

}

void left()

{

motor1.run(BACKWARD);

motor2.run(FORWARD);

}

void right()

{

motor1.run(FORWARD);

motor2.run(BACKWARD);

}

void Stop()

{

motor1.run(RELEASE);

motor2.run(RELEASE);

}

--------------------------------------------------------------------------------------

So that was it!

1. Just upload the code on to the Arduino.

2. Make the connections.

3. Launch the app.

4. Connect your phone to the car.

Here is our finished BEAUTY!

I hope this tutorial was good enough to get you going. If you got any suggestions for some changes

or further addition to this project then please let me know in the comment section.

#include <AFMotor.h>

AF_DCMotor motor1(1);  //motor1 is the left   motor

AF_DCMotor motor2(2);  //motor2 is the right motor

int val;

void   setup()

{

  Serial.begin(9600); 

 

  motor1.setSpeed(255); //motor speed   is set

  motor2.setSpeed(255);

  Stop();

}

void loop() {

   

bt=Serial.read();

if(val=='1')  //when the bluetooth module recieves   1 the car moves forward

{

 forward(); 

}

if(val=='2')  //when the   bluetooth module recieves 2 the car moves backward

{

 backward(); 

}

if(val=='3')   //when the bluetooth module recieves 3 the car moves left

{

 left(); 

}

if(val=='4')   //when the bluetooth module recieves 4 the car moves right

{

 right(); 

}

if(val=='5')   //when the bluetooth module recieves 5 the car stops

{

 Stop(); 

}

}

void   forward()

{

     motor1.run(FORWARD);

  motor2.run(FORWARD);

}

void   backward()

{

     motor1.run(BACKWARD);

  motor2.run(BACKWARD);

}

void   left()

{

  motor1.run(BACKWARD);

  motor2.run(FORWARD);

}

void right()

{

   motor1.run(FORWARD);

  motor2.run(BACKWARD);

}

void Stop()

{

  motor1.run(RELEASE);

   motor2.run(RELEASE);

}

#include <AFMotor.h>

AF_DCMotor motor1(1);  //motor1 is the left

  motor

AF_DCMotor motor2(2);  //motor2 is the right motor

int val;

void

  setup()

{

  Serial.begin(9600); 

 

  motor1.setSpeed(255); //motor speed

  is set

  motor2.setSpeed(255);

  Stop();

}

void loop() {

  

bt=Serial.read();

if(val=='1')  //when the bluetooth module recieves

  1 the car moves forward

{

 forward(); 

}

if(val=='2')  //when the

  bluetooth module recieves 2 the car moves backward

{

 backward(); 

}

if(val=='3')

  //when the bluetooth module recieves 3 the car moves left

{

 left(); 

}

if(val=='4')

  //when the bluetooth module recieves 4 the car moves right

{

 right(); 

}

if(val=='5')

  //when the bluetooth module recieves 5 the car stops

{

 Stop(); 

}

}

void

  forward()

{

     motor1.run(FORWARD);

  motor2.run(FORWARD);

}

void

  backward()

{

     motor1.run(BACKWARD);

  motor2.run(BACKWARD);

}

void

  left()

{

  motor1.run(BACKWARD);

  motor2.run(FORWARD);

}

void right()

{

  motor1.run(FORWARD);

  motor2.run(BACKWARD);

}

void Stop()

{

  motor1.run(RELEASE);

  motor2.run(RELEASE);

}